Epson TM-T70II-DT, Technical Reference Manual

Page: 65 / 238

Chapter 2 Setup
65
2
Connecting the AC Adapter
Use t he ded i ca t ed AC adap t er for TM-T70II-DT prov i ded w it h t he pr int er.
Connecting the AC adapter
1
Make sure that the power to the printer is turned off and that the AC
adapter power cord is unplugged from the wall socket.
2
Insert the AC adapter power cord into the DC-In for the printer.
3
Plug in the AC Adapter power cord to the wall socket.
WARNING

Be sure to use the included AC adapter as the power supply unit.

Using a nonstandard power supply can result in electric shock and fire.

Should a fault ever occur in the included AC adapter, immediately turn off the
power to the printer and unplug the power supply cable from the wall socket.
WARNING

Be sure to unplug the power supply unit’s cable from the wall socket whenever
connecting or disconnecting the power supply unit to the printer.

Failure to do so may result in damage to the power supply unit or the product.

Make sure the wall socket power supply satisfies the rated voltage requirements
of the power supply unit. Never insert the power supply cable plug into a socket
that does not meet the rated voltage requirements of the power supply unit.

Doing so may result in damage to both the power supply and the product.
When you disconnect the dedicated DC cable connector for TM-T70II, make sure that the
AC adapter power cord is unplugged, and hold the connector at the section marked with an
arrow to pull it straight out.
DC-In