Epson TM-T70II-DT, Technical Reference Manual

Page: 70 / 238

70
Multi-tone print density
Selec t able from levels 1 t o 13 (70% ~ 130%)
I niti al se tting : level 7 (100%)
Print speed
Selec t able from levels 1 t o 13 (Slow ~ Fas t )
I niti al se tting : level 13
Selecting the number of head energizing parts
• O n e-par t e n er gi z ing ( initi al se tting )
• Two-par t e n er gi z ing
Character code table default
Selec t able from 43 pa g es in cl u d ing u ser def in ed pa g e
I niti al se tting : Pa g e (PC437: USA, S t a n dard E u rope)
International character default
Selec t able from 18 se t s
I niti al se tting : USA

First change the print density, and then configure the Multi-tone density.

In you set the density too high, the contrast becomes lower. Select the density level
checking the overall tone balance of your image.
Depending on print conditions, such as print duty, print head temperature, and data
transmission speed, print speed is automatically adjusted, which may cause white lines
due to intermittent print (the motor sometimes stops).
To prevent them from occurring, select the print speed to a slow setting value to produce
stable print speed.

Usually, the number of head energizing parts does not need to be changed.

When printing at the maximum speed, select “One-part energizing.”
For the character code table, see "Character Code Tables" on page 193 .
For the International character sets, see "International Character Sets" on page 237 .