Epson TM-C7500 Series Technical Reference Manual Download

Page: 19 / 224

Chapter 1 Product Overview

Operation Panel

Name

Description

(Power) LED

Lights when the printer is powered on.

Flashes during printing or ink charging.

Pause LED

Lights/Flashes while the printer is paused.

Status LED

Lights/Flashes in blue when the printer is operating properly.

Lights/Flashes in amber when the printer has an error.

Paper LED

Lights when the printer has no paper or jammed paper, or when the

Paper Set Cover, the Roll Paper Cover, or the Front Cover is open.

Ink LED

Flashes in the following conditions:



Ink is low.



The maintenance box is nearly full.

Lights in the following conditions:



The ink cartridge cover/maintenance box cover is open.



No ink cartridge/maintenance box is set.



It is time to replace the ink cartridge/maintenance box.

LCD

Displays the menus and messages.

See

"Ink Cartridge and Maintenance Box Status" on page 31

Pause Button

Press this button during printing to pause printing after one page of data

is printed.

Press this button while the printer is paused (while the Pause LED is on) to

resume printer operation and have the printer return to the print standby

status.

Status

Pause

Cancel

Paper

Ink

K C

M/B

Back Feed

Feed

Cut

ck Feed Button

Ink LED

per LED

Feed Button

Cut Button

election/

etting Button

ncel Button

use Button

LCD

tus LED

(Power) Button

use LED

(Power) LED

Summary of Contents for TM-C7500 Series

































































































































































































































Search results

Summary of Contents for TM-C7500 Series

Reviews:

Related manuals for TM-C7500 Series

Brands by name

Popular brands

Epson TM-C7500 Series, Technical Reference Manual

Search results

Summary of Contents for TM-C7500 Series

Reviews:

Related manuals for TM-C7500 Series

Brands by name

Popular brands