manualshive.com logo in svg

Epson TM-C7500 Series, Technical Reference Manual

Share
Download
Epson TM-C7500 Series Technical Reference Manual Download Page 187

187

Appendix

Operating Environment

OS

Microsoft Windows 8.1 (32 bit/ 64 bit)

Microsoft Windows 8 (32 bit/ 64 bit)

Microsoft Windows 7 SP1 (32 bit/ 64 bit)

Microsoft Windows Vista SP2 (32 bit/ 64 bit)

Microsoft Windows XP SP3 (32 bit)

Microsoft Windows Server 2012 R2

Microsoft Windows Server 2012

Microsoft Windows Server 2008 R2

Microsoft Windows Server 2008 (32 bit/ 64 bit)

Microsoft Windows Server 2003 R2 (32 bit)

Computer

Must support the following computers that run the above operating systems.

PC/AT compatible

CPU

Conforms to the operating environment of the OS.

(For Windows 8.1/ Windows 8/ Windows 7/ Windows Vista/ Windows XP/ 

Windows Server 2012/ Windows Server 2008/ Windows Server 2003:

 Computer equipped with Pentium 4 2GHz or better processor is recommended.

 Intel Pentium/ Celeron series or AMD Athlon/ Duron family processor, or processor

 interchangeable with these, is recommended.)

Memory

Conforms to the operating environment of the OS.

(For Windows 8.1/ Windows 8/ Windows 7/ Windows Vista/ Windows XP/ 

Windows Server 2012/ Windows Server 2008/ Windows Server 2003:

1GB or higher is recommended.)

HDD

Conforms to the operating environment of the OS.

(For Windows 8.1/ Windows 8/ Windows 7/ Windows Vista/ Windows XP/ 

Windows Server 2012/ Windows Server 2008/ Windows Server 2003: 

Must have at least 250 MB free space.)

The above requirements may conflict with the minimum requirements of the operating system 
supported.  If so, the operating system’s minimum requirements take precedence.

Summary of Contents for TM-C7500 Series

































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands