7.
Close the screen.
The screen automatically closes after a specific length of time.
Note:
If connection fails, restart the access point, move it closer to the printer, and try again. If it still does not work, print a
network connection report and check the solution.
8.
Close the network connection settings screen.
Making Wi-Fi Settings by PIN Code Setup (WPS)
You can automatically connect to an access point by using a PIN code. You can use this method to set up if an
access point is capable of WPS (Wi-Fi Protected Setup). Use a computer to enter a PIN code into the access point.
1.
Tap
on the home screen.
2.
Select
Router
.
3.
Tap
Start Setup
.
If the network connection is already set up, the connection details are displayed. Tap
Change to Wi-Fi
connection.
or
Change Settings
to change the settings.
4.
Select
Others
>
PIN Code Setup(WPS)
5.
Use your computer to enter the PIN code (an eight digit number) displayed on the printer's control panel into
the access point within two minutes.
Note:
See the documentation provided with your access point for details on entering a PIN code.
6.
Tap
Start Setup
.
7.
Close the screen.
The screen automatically closes after a specific length of time if you do not select
Close
.
Note:
If connection fails, restart the access point, move it closer to the printer, and try again. If it still does not work, print a
connection report and check the solution.
8.
Close the network connection settings screen.
Using Wi-Fi Direct (Simple AP) Connection
Wi-Fi Direct (simple AP) connection connects the printer and devices directly.
Because the printer can be connected directly without going through the connected network, it can be used as
temporary connection of the device to the printer that is connected to the network without access authority.
See the
User's Guide
for details on how to connect the printer using a Wi-Fi Direct (simple AP) connection.
Administrator's Guide
Appendix
71
