Setting the Proxy Server
Set up the proxy server if both of the following are true.
❏
The proxy server is built for Internet connection.
❏
You want to update the printer firmware via the Internet from the printer’s control panel or Web Config.
1.
Select Menu on the home screen.
When making settings after IP address setting, the
Advanced
screen is displayed. Go to step 3.
2.
Select
General Settings
>
Network Settings
>
Advanced
.
3.
Select
Proxy Server
.
4.
Select
Use
for
Proxy Server Settings
.
5.
Enter the address for the proxy server by IPv4 or FQDN format.
Confirm the value reflected on the previous screen.
6.
Enter the port number for the proxy server.
Confirm the value reflected on the previous screen.
7.
Tap
Start Setup
.
Connecting to LAN
Connect the printer to the network by Ethernet or Wi-Fi.
Related Information
&
“Connecting to Ethernet” on page 21
&
“Connecting to the Wireless LAN (Wi-Fi)” on page 22
Connecting to Ethernet
Connect the printer to the network by using the Ethernet cable, and check the connection.
1.
Connect the printer and hub (LAN switch) by Ethernet cable.
2.
Select Menu on the home screen.
3.
Select
General Settings
>
Network Settings
.
4.
Select
Connection Check
.
The connection diagnosis result is displayed. Confirm the connection is correct.
5.
Tap
OK
to finish.
When you tap
Print Check Report
, you can print the diagnosis result. Follow the on-screen instructions to
print it.
Administrator's Guide
Network Connection
21
