manualshive.com logo in svg

Epson SureColor SC-P8500D, Administrator'S Manual

Share
Download
Epson SureColor SC-P8500D Administrator'S Manual Download Page 104

Related Information

&

“Accessing Web Config” on page 24

&

“Logging on to the Printer Using Web Config” on page 48

Cannot Communicate with IPsec Communication

Specify the algorithm that the printer or the computer does not support.

The printer supports the following algorithms. Check the settings of the computer.

Security Methods

Algorithms

IKE encryption algorithm

AES-CBC-128, AES-CBC-192, AES-CBC-256, AES-GCM-128*, AES-GCM-192*,
AES-GCM-256*, 3DES

IKE authentication algorithm

SHA-1, SHA-256, SHA-384, SHA-512, MD5

IKE key exchange algorithm

DH Group1, DH Group2, DH Group5, DH Group14, DH Group15, DH
Group16, DH Group17, DH Group18, DH Group19, DH Group20, DH
Group21, DH Group22, DH Group23, DH Group24, DH Group25, DH
Group26, DH Group27*, DH Group28*, DH Group29*, DH Group30*

ESP encryption algorithm

AES-CBC-128, AES-CBC-192, AES-CBC-256, AES-GCM-128, AES-GCM-192,
AES-GCM-256, 3DES

ESP authentication algorithm

SHA-1, SHA-256, SHA-384, SHA-512, MD5

AH authentication algorithm

SHA-1, SHA-256, SHA-384, SHA-512, MD5

*available for IKEv2 only

Related Information

&

“Encrypted Communication Using IPsec/IP Filtering” on page 89

Cannot Communicate Suddenly

The IP address of the printer has been changed or cannot be used.

When the IP address registered to the local address on Group Policy has been changed or cannot be used, IPsec
communication cannot be performed. Disable IPsec using the printer's control panel.

If the DHCP is out of date, rebooting or the IPv6 address is out of date or has not been obtained, then the IP
address registered for the printer's Web Config (

Network Security

 tab > 

IPsec/IP Filtering

 > 

Basic

 > 

Group

Policy

 > 

Local Address(Printer)

) may not be found.

Use a static IP address.

The IP address of the computer has been changed or cannot be used.

When the IP address registered to the remote address on Group Policy has been changed or cannot be used, IPsec
communication cannot be performed.

Disable IPsec using the printer's control panel.

Administrator's Guide

Advanced Security Settings for Enterprise

104

Summary of Contents for SureColor SC-P8500D














































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands