Epson Stylus Pro 9860 User Manual Download Page 8 | Manualshive

Page: 8 / 101

background image

The Control Panel

Buttons, Lights, and
Messages

You can check the ink remaining and printer status on
the control panel.

Buttons

1. Power button (

)

Turns the printer on or off.

2. Pause/Reset button (

)

❏

The printer enters the PAUSE state when this
button is pressed in the READY state. To cancel the
pause, select

PAUSE CANCEL

on the LCD panel.

When selecting

JOB CANCEL

, it functions as the

Reset button. The printer stops printing and clears
print data in the printer. After clearing the data, it
may take a while to return to the READY state.

❏

The printer returns to the READY state when this
button is pressed in the Menu mode.

❏

Clears errors if it is possible.

See

“Error messages” on page 73

3. Cleaning button (

)

Shortcut button to the CLEANING menu in
MAINTENANCE. If you notice that print quality has
declined, press this button and select the best cleaning
option to improve print quality.

See

“Head cleaning” on page 65

4. Ink Cover Open button (

)

Slightly opens the selected ink cover, choosing left or
right side indicated on the display.

5. Paper Source button (

)

❏

Selects a paper source and roll paper cut method.
The icon changes by pressing this button. However,
you cannot change the paper source icon to Sheet

when you set the paper while

REMAINING

PAPER SETUP

is set to

ON

.

Icon

Explanation

Roll Auto Cut
On

Prints on the roll paper. It
cuts the roll paper
automatically after
printing each page.

Roll Auto Cut
Off

Prints on the roll paper. It
does not cut the paper
automatically after
printing. You need to cut
the paper with a cutter
manually.

Sheet

Prints on the sheet.

❏

Returns to the previous level when pressed in the
Menu mode.

❏

When you print from the software RIP, the settings
you make on the software RIP have priority over the
settings you make on the printer’s control panel.

6. Paper Feed button (

/

)

❏

Feeds the roll paper in the forward

or reverse

direction.

You can feed 3 m of paper in the forward
direction with one press. If you want to feed the
paper faster in the forward

direction, press and

hold it for 3 seconds. You can feed 20 cm of paper in
the reverse

direction with one press.

❏

If you press these buttons while the paper presser is
released, you can adjust the paper suction in the
paper feed path in 3 stages.

“Loading cut sheet A3 size or larger / thick

paper” on page 33

❏

Press the

button when setting a single cut sheet

having a thickness under 0.5 mm, the printer starts
paper feeding and then goes to the READY state.

❏

Feeds the sheet in the forward direction when you
press the

button.

❏

Changes the parameter in the forward

or

reverse

order when selecting a desired

parameter in the Menu mode.

Epson Stylus Pro 9860 User's Guide

The Control Panel

8

«
...
6
7
8
9
10
...
»

Summary of Contents for Stylus Pro 9860






































































































Reviews:

No comments

Related manuals for Stylus Pro 9860

Figure 4 Standalone

Brand: 3D Systems Pages: 2

Brand: B3 innovations Pages: 12

Brand: Oki Pages: 215

Brand: Xerox Pages: 3

Brand: Xerox Pages: 13

Brand: Xerox Pages: 8

Brand: Xerox Pages: 41

Versant 3100 Press

Brand: Xerox Pages: 45

Brand: Xerox Pages: 2

Brand: Xerox Pages: 11

Brand: Xerox Pages: 192

Brand: Xerox Pages: 10

Brand: Xerox Pages: 15

WORKCENTRE 7425

Brand: Xerox Pages: 88

Brand: Xerox Pages: 10

Brand: Xerox Pages: 33

C123 Copycentre

Brand: Xerox Pages: 154

WorkCentre 5845

Brand: Xerox Pages: 14

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands