❏
If you use an extension cord with this product,
make sure the total ampere rating of the devices
plugged into the extension cord does not exceed the
cord’s ampere rating. Also, make sure the total
ampere rating of all devices plugged into the wall
outlet does not exceed the wall outlet’s ampere
rating.
❏
Do not attempt to service this product yourself.
❏
Unplug this product and refer servicing to qualified
service personnel under the following conditions:
The power cord or plug is damaged; liquid has
entered the product; the product has been dropped
or the cabinet damaged; the product does not
operate normally or exhibits a distinct change in
performance.
❏
If you plan to use the printer in Germany, observe
the following:
To provide adequate short-circuit protection and
over-current protection for this printer, the
building installation must be protected by a 10 or 16
amp circuit breaker.
❏
If damage occurs to the plug, replace the cord set or
consult a qualified electrician. If there are fuses in
the plug, make sure you replace them with fuses of
the correct size and rating.
When using this product
❏
Do not put your hand inside this product or touch
the ink cartridges during printing.
❏
Do not move the print heads by hand; otherwise
you may damage this product.
❏
Always turn the product off using the
Power
button
on the control panel. When this button is pressed,
the
Power
light flashes briefly then goes off. Do not
unplug the power cord or turn off the product until
the
Power
light stops flashing.
When handling the ink
cartridges
❏
Keep ink cartridges out of the reach of children and
do not drink.
❏
If ink gets on your skin, wash it off with soap and
water. If it gets in your eyes, flush them immediately
with water.
❏
Use the ink cartridge before the date printed on its
package.
❏
Do not dismantle the ink cartridges or try to refill
them. This could damage the print head.
❏
Do not touch the green IC chip on the side of the
cartridge. This may affect normal operation and
printing.
❏
The IC chip on this ink cartridge retains a variety of
cartridge related-information, such as the ink
cartridge status, so that the cartridge may be
removed and reinserted freely.
❏
If you remove an ink cartridge for later use, protect
the ink supply area from dirt and dust, and store it in
the same environment as this product. Note that
there is a valve in the ink supply port, making covers
or plugs unnecessary, but care is needed to prevent
the ink from staining items that the cartridge
touches. Do not touch the ink supply port or
surrounding area.
When transporting this product
Before transporting the printer, make sure the print
heads are in the home (far right) position.
Epson Stylus Pro 9860 User's Guide
Safety Instructions
6
