manualshive.com logo in svg

Epson Stylus Pro 9860, User Manual

Share
Download
Epson Stylus Pro 9860 User Manual Download Page 59

Replacing the
Maintenance Tank

The maintenance tank absorbs ink discharged when
cleaning the print head. There are two maintenance
tanks placed on the left and right. You need to replace
the maintenance tank when the LCD panel instructs to
do so.

Confirming the free space of the 
maintenance tank

Using the printer’s control panel

The free space of the maintenance tank is always
displayed on the LCD panel.

 See 

“Display” on page 10

You can check the free space in the 

PRINTER STATUS

menu. You need to check it before printing a lot of data.
If the maintenance tank has not enough empty space,
prepare a new one.

 See 

“Using the Menu mode” on page 12

 

 See 

“PRINTER STATUS ” on page 19

Replacing the maintenance tank

Be sure to use a maintenance tank that is supported with
this printer. 

 See 

“Options and Consumable Products” on

page 50

c

Caution:

Do not replace the maintenance tank while
printing data.

A

Turn off the printer.

B

Take a new maintenance tank out of the package.

C

Put your hand on the handle of the maintenance
tank, then gently pull it straight out.

D

Put the used maintenance tank in the plastic bag
provided with the replacement cartridge, and
dispose of it properly.

Epson Stylus Pro 9860     User's Guide

Maintenance

59

Summary of Contents for Stylus Pro 9860






































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands