Epson Stylus Pro 9860 User Manual Download Page 5 | Manualshive

Page: 5 / 101

background image

Safety Instructions

Important Safety
Instructions

Read all of these instructions before using the printer.
Also be sure to follow all warnings and instructions
marked on the printer.

Warning, Cautions, and Notes

w

Warning:

must be followed carefully to avoid bodily injury.

c

Caution:

must be observed to avoid damage to your
equipment.

Note:

contain important information and useful tips on the
operation of this printer.

When choosing a place for this
product

❏

Place this product on a flat, stable surface that is
larger than this product. This product will not
operate properly if it is tilted or at an angle.

❏

Avoid places subject to rapid changes in
temperature and humidity. Also keep it away from
direct sunlight, strong light, or heat sources.

❏

Avoid places subject to shocks and vibrations.

❏

Keep this product away from dusty areas.

❏

Place this product near a wall outlet where the plug
can be easily unplugged.

When setting up this product

❏

Do not block or cover the openings in this product’s
cabinet.

❏

Do not insert objects through the slots. Take care
not to spill liquid on this product.

❏

This product’s power cord is for use with this
product only. Use with other equipment may result
in fire or electric shock.

❏

Connect all equipment to properly grounded
power outlets. Avoid using outlets on the same
circuit as photocopiers or air control systems that
regularly switch on and off.

❏

Avoid electrical outlets controlled by wall switches
or automatic timers.

❏

Keep the entire computer system away from
potential sources of electromagnetic interference,
such as loudspeakers or the base units of cordless
telephones.

❏

Use only the type of power source indicated on the
product’s label.

❏

Use only the power cord that comes with this
product. Use of another cord may result in fire or
electric shock.

❏

Do not use a damaged or frayed power cord.

Epson Stylus Pro 9860 User's Guide

Safety Instructions

5

«
...
3
4
5
6
7
...
»

Summary of Contents for Stylus Pro 9860






































































































Reviews:

No comments

Related manuals for Stylus Pro 9860

AdvancedPunch Pro

Brand: GBC Pages: 92

Brand: NCR Pages: 224

SelfServ Checkout 7350

Brand: NCR Pages: 20

Brand: Olivetti Pages: 20

Brand: Olivetti Pages: 63

Brand: Olivetti Pages: 180

Brand: Olivetti Pages: 118

Brand: Olivetti Pages: 80

Brand: Olivetti Pages: 253

Brand: Olivetti Pages: 163

d-COLOR MF222plus

Brand: Olivetti Pages: 151

Brand: Olivetti Pages: 176

X2650 - Color Printer 3-IN-1

Brand: Lexmark Pages: 2

Brand: SNBC Pages: 78

Brand: Ricoh Pages: 2

Brand: Oki Pages: 4

Brand: Oce Pages: 186

Brand: Phoenix Contact Pages: 52

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands