Epson Stylus Pro 9860, User Manual

Page: 28 / 101

N
Insert the paper into the insertion slot. Pull the
paper down through the paper insertion slot so
that it comes out below.
Take care not to fold the edge of the paper, and
insert it so that there is no slack.
If you have difficulty feeding the paper, adjust the
paper suction by pressing the
or button.
Pull the paper to fit the edge of the paper to the
label position.
O
Close the roll paper cover.
P
Press the button.
After a few seconds, the paper moves to the
printing position. When you press the
button, it moves immediately.
Q
If ARE THESE SETTINGS OK? appears on the
LCD panel, press the or button to select
NO
and then press the button. Set the media
type and paper remaining, and then press the
button to set the media.
The previous setting appears on the LCD panel. If
the media type and paper remaining are correct,
select
YES and then press the button.
R
If the edge of the roll paper has folds, press the
button to cut the edge.
S
When using the paper basket, set it in the forward
or backward position.
You can also use the optional Auto Take-up Reel
Unit.
See “Using the paper basket and paper
guides” on page 36
See “Using Auto Take-up Reel Unit” on
page 40
Epson Stylus Pro 9860 User's Guide
Paper Handling
28