Epson Stylus Pro 7890 Series, Service Manual, Page: 67 / 519

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision H
PRODUCT DESCRIPTION Control Panel 67
Confidential
PAPER SETUP
CUSTOM PAPER PAPER NO.1 - 10
You can select a number (between 1 to 10) to register the settings (such as Paper Type, Platen Gap, Thickness
Pattern, Paper Feed Adjust, Drying Time, Paper Suction) or to recall these settings you have made. The number
you select here is displayed on the LCD panel.
√ √
PLATEN GAP
NARROW
Adjusts the platen gap (gap between the printhead and paper surface) according to the paper thickness.
STANDARD: use this setting under normal conditions
NARROW: select this when using thin paper.
WIDE, WIDER: select this when smudges or blurring appear due to an excess pressure on the paper.
WIDEST: select this when using heavy paper.
√ √ √
STANDARD
WIDE
WIDER
WIDEST
THICKNESS
PATTERN
PRINT Prints a pattern for checking the thickness of the loaded paper.
√ √ √
PAPER FEED ADJUST
0.00% Adjusts the paper feed line pitch.
The larger the value is, the more the possibility to cause white bands on printout image.
The smaller the value is, the more the possibility to cause black bands on printout image.
√ √ √
-0.70% to +0.70%
DRYING TIME
0.0 SEC
Sets a time period to pause the carriage movement for drying the printed surface. Depending on paper type and
density, drying ink may take longer. Check the result and set longer time period in such case.
√ √
0.0 SEC to 10.0 SEC √
PAPER SUCTION
STANDARD
Sets the power level of the suction fan.
√ √ √
-1 to -4
SET ROLL PAPER
TENSION
NORMAL
When using a cloth or thin paper or when winkles appear in the paper during printing, select
“HIGH” or “HIGHER”.
√ √ HIGH
HIGHER
REMOVE SKEW
ON
Sets whether to perform this operation to reduce the paper skew or not.
√ √ √
OFF
Table 1-8. Menu Mode Settings List
Top Menu Menu Item
Settings
(shaded one is the default)
Explanation
Applied
model
P
ro 79
00/7
910
/990
0/99
10
/9
89
0/99
08/7
890
/790
8
Pro 77
00/7
71
0/77
00M
/7
71
0M/97
00
/9
71
0
Pro
WT79
00
/WT7
910