Epson Stylus Pro 7890 Series, Service Manual

Page: 403 / 519

Epson Stylus Pro 7700/7710/7700M/7710M/7900/7910/9700/9710/9900/9910/WT7900/WT7910/9890/9908/7890/7908 Revision I
ADJUSTMENT Head Related Adjustments 403
Confidential
5.4.13 Initial Ink Charge Flag ON/OFF
This allows you to set whether initial ink charging is executed or not when turning the
power ON.
PROCEDURE
1. Turn the printer ON.
2. Start the Service Program and select Initial Ink Charge Flag ON/OFF from
Initial Ink Charge Flag .
3. Select ON or OFF , and press [Run].
4. Turn the printer OFF.
5. If ON is selected, initial ink charge will be performed next time you start the
printer.
Figure 5-64. [Initial Ink Charge Flag ON/OFF] Screen
5.4.14 Initial Ink Charge
This is to execute the initial ink charge.
PROCEDURE
1. Turn the printer ON in the Serviceman Mode.
Turn the power ON while pressing [Menu ] + [Paper Feed ] + [OK]
simultaneously.
2. Select SELF TESTING
→
Cleaning
→
Init.Fill .
3. Press [OK] while [Enter] Start is displayed.
The initial ink charge sequence will be executed.
C A U T I O N
Make sure to check the ink remaining level and if the remaining
amount is less than 50%, replace the ink cartridge with a new one
before starting this adjustment.