254
The Control Panel
If you use Epson special media, select
STANDARD
, and then go
to the step 9. You do not need to make the paper thickness
setting because
STANDARD
automatically determines the paper
thickness.
6. Press the
Menu
button to display
PLATEN GAP
, and then
press the
Paper Feed
or
Paper Feed
button to select
NARROW
,
STANDARD
,
WIDER
,
WIDE
, or
WIDEST
.
7. Press the
Menu
button to save the selected platen gap
setting, and
THICKNESS PAT
appears on the LCD.
8. Press the
Menu
button again to print the paper thickness
test printing pattern.
Paper thickness test pattern example:
9. Examine the printed pattern to determine which set of lines
are aligned (showing the smallest gap), and note the
corresponding number.
10. After the pattern is printed,
THICKNESS NUM
appears. Press the
Paper Feed
or
Paper Feed
button to select the number
noted in step 9.
11. Press the
Menu
button to save the selected value.
12.
CUT METHOD
appears. Press the
Paper Feed
or
Paper Feed
button to select
STANDARD
,
THICK, SLOW
,
THICK, FAST
, or
THIN PAPER
, and then press the
Menu
button.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
smallest gap