300
Maintenance and Transportation
Converting the Black Ink Cartridges
You can change the black ink according to your purpose. You can
choose either Matte Black or Photo Black.
c
Caution:
To avoid interrupting a black ink change, observe the following
conditions:
❏
Do not turn off the printer.
❏
Do not open the top cover.
❏
Do not remove the rear cover.
❏
Do not move the paper lever to the released position.
❏
Do not remove the ink cartridges.
❏
Do not remove the maintenance tank.
❏
Do not unplug the power cord.
Note:
❏
If an electrical power failure occurs during this operation, turn the
printer on again. You can continue your procedure at the breakpoint.
❏
The Black Ink Conversion Kit is required when changing the black
ink. Also, the black ink cartridge (either Matte or Photo that you
want to convert) is required. To check the product code, see
“Consumable Products” on page 375.
❏
If
MNT TK NEAR FULL
or
MNT TNK FULL
appears on the LCD, you
need to replace the maintenance tank. See “Replacing the
Maintenance Tank” on page 308.
To change the black ink, follow the steps below.
1. Make sure that
READY
appears on the LCD panel.