Epson Stylus Pro 4800 Portrait Edition Reference Manual Download Page 321

Page: 321 / 396

Problem Solver

321

Eng

Error messages

Message

Description

What to do

UNABLE TO PRINT

An error may be
occurring when you try
to print patterns such as
nozzle check or head
alignment.

End the TEST PRINT
MENU first, and solve
the error displayed on
the LCD. Then try to
print patterns again.

MNT TK NEAR FULL

The maintenance tank is
almost full.

Replace the
maintenance tank with
a new one. See
“Replacing the
Maintenance Tank” on
page 308.

INK LOW

Ink cartridge is nearly
empty.

Replacement of ink
cartridge is nearly
needed.
Although you can
continue printing in INK
LOW situation, it may
decline the print
quality.

MNT REQ nnnn

A part used in the printer
has nearly reached the
end of its life. "nnnn"
shows the code of the
part.

Note the code and
contact your dealer.
See “Contacting
Customer Support” on
page 355.

REMOVE PAPER

Cleaning cannot be
executed because thick
paper is loaded.

Remove the thick
paper, and move the
paper lever to the
secured position.

The printer could not
feed the printout.

Remove the printout.

Summary of Contents for Stylus Pro 4800 Portrait Edition













































































































































































































































































































































































































Search results

Summary of Contents for Stylus Pro 4800 Portrait Edition

Reviews:

Related manuals for Stylus Pro 4800 Portrait Edition

Brands by name

Popular brands

Epson Stylus Pro 4800 Portrait Edition, Reference Manual

Search results

Summary of Contents for Stylus Pro 4800 Portrait Edition

Reviews:

Related manuals for Stylus Pro 4800 Portrait Edition

Brands by name

Popular brands