To turn on Default Setting mode and print instructions, turn off
the printer. Make sure there is paper loaded in the printer.
Then hold down the
Economy/Condensed
button while you
turn the printer back on. Follow the instructions the printer
prints to change the default settings by pressing the buttons on
the control panel. When you are finished, press
Pause
and
turn off the printer to exit Default Setting mode.
The printer functions are shown in the table below and
described in the following paragraphs. The default settings are
in bold.
Setting
Options
Print direction
Auto
, Bi-D, Uni-D
Font
Roman, Sans Serif,
Courier
, Prestige,
Script, Roman T, Sans Serif H
Pitch
10 cpi,
12 cpi, 15 cpi, 17.1 cpi, 20 cpi,
Proportional
I/F mode
Auto
, Parallel, Option
Auto interface wait time
10 seconds
, 30 seconds
Software
ESC/P 2
, IBM XL24E
Auto CR*
Off
, On
AGM*
Off
, On
Character table
PC437
, PC850, PC860, PC861, PC863,
PC865, Abicomp, BRASCII, Roman 8,
ISO Latin 1, Italic
International character set
for Italic table
Italic U.S.A.
, Italic France, Italic Germany,
Italic U.K., Italic Denmark 1, Italic Sweden,
Italic Italy, Italic Spain I
Auto line feed
Off
, On
Network I/F mode
Off
, On
0 slash
0
, 0
/
Page length for
continuous paper
11 inch
, 12 inch, 8.5 inch, 70/6 inch, Others
Skip over perforation
Off
, On
Auto tear off
Off
, On
Controlling the Printer
2-7
