Supported Paper
This printer supports the following paper specifications.
The type and quality of the paper will greatly affect print
quality. Be sure to use the correct paper for your needs.
Refer to the manual included with your paper or contact
the manufacturer for details regarding any precautions
or warnings that must be taken into consideration when
using that paper. Test the print quality first before
purchasing a large amount of paper.
c
Important:
Do not use paper that is wrinkled, scuffed, torn, or
dirty.
Roll Paper
Paper core size
2 inch and 3 inch
Roll paper
outer diameter
150 mm or less
Width
254 mm (10 inches) to 1,118 mm (44
inches)
Paper
Thickness
0.08 to 0.5 mm
Movement and
Transportation
This section describes how to move or transport the
printer.
How to Move
This section describes how to move the printer on the
same floor between flat surfaces. See the following
section for how to move the printer between surfaces on
different levels or to a different floor.
U
!
Caution:
When moving the printer, do not tilt it more than
10 degrees front, back, left, or right. This could
cause the printer to tilt over.
Preparing to Move
Make the following preparations in advance before
moving the printer.
❏
Turn off the printer and remove all cables.
❏
For models equipped with a Waste Ink Bottle,
remove the Waste Ink Bottle.
❏
Remove any paper.
❏
Remove any optional components if they are
installed.
❏
Unlock the stand locks.
Setting Up the Printer After Moving
After you move the printer, configure the following
settings to get the printer ready for use.
❏
Check that the location is appropriate for
installation, and set up the printer.
U
Setup Guide
(Booklet)
❏
Insert the power plug into the outlet and turn on the
printer.
U
Setup Guide
(Booklet)
SC-F6200 Series/SC-F6000 Series User's Guide
Appendix
83
