manualshive.com logo in svg

Epson SC-F6000 Series, User Manual

Share
Download
Epson SC-F6000 Series User Manual Download Page 6

❏

Always turn the product off using the Power button
on the control panel. When this button is pressed,
the Power light flashes briefly then goes off. Do not
unplug the power cord or turn off the product until
the Power light stops flashing.

When handling the ink packs

❏

Keep ink packs out of the reach of children and do
not drink.

❏

Wear protective eyewear, gloves, and a mask when
performing maintenance.

Should ink contact your skin or enter your eyes or
mouth, immediately take the following actions:

❏

If fluid adheres to your skin, immediately
wash it off using large volumes of soapy
water. Consult a physician if the skin appears
irritated or is discolored.

❏

If fluid enters your eyes, rinse immediately
with water. Failure to observe this
precaution could result in bloodshot eyes or
mild inflammation.

❏

If fluid enters your mouth, consult a
physician immediately.

❏

If fluid is swallowed, do not force the person
to vomit, and consult with a physician
immediately. If the person is forced to vomit,
fluid may get caught in the trachea which can
be dangerous.

Note on this Guide

Meaning of Symbols

!

Warning:

Warnings must be followed to
avoid serious bodily injury.

!

Caution:

Cautions must be followed to
avoid damage to this product or
bodily injury.

c

Important:

Important must be followed to
avoid damage to this product.

Note:

Notes contain useful or
additional information on the
operation of this product.

The symbols on the product

The symbols on this Epson product are used in order to
ensure safety and proper use of the product and to
prevent danger to customers and other persons, and
property damage.

The symbols indicate the meaning below. Be sure that
you completely understand the meaning of symbols on
this product before using it.

Stand-by

Caution, Warning

Caution hot

Illustrations

The figures in this manual are for illustrative purposes
only, and may differ from the actual product.

Operating System Versions

In this documentation, the following abbreviations are
used.

Windows refers to Windows 8, 7, Vista, XP.

❏

Windows 8 refers to Windows 8, Windows 8 Pro,
and Windows 8 Enterprise.

❏

Windows 7 refers to Windows 7 Home Basic,
Windows 7 Home Premium, Windows 7
Professional, and Windows 7 Ultimate.

SC-F6200 Series/SC-F6000 Series     User's Guide

Introduction

6

Summary of Contents for SC-F6000 Series




































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands