Epson SC-F2100 SERIES User Manual Download Page 75

Page: 75 / 143

Buttons that are used in the following operations

Confirm that the printer is on, and then press the

button.

The Maintenance menu is displayed.

Press the

buttons to highlight

Replace

White Ink

, and then press the

button.

Press the

buttons to highlight

Yes

, and then

press the

button.

Perform steps 2 to 6 from the ink cartridge
replacement procedure to switch from White ink
to cleaning liquid or from cleaning liquid to
White ink, and then press the

button.

When switching from cleaning liquid to White
ink (for the first time)

Go to step 5.

When switching from White ink to cleaning
liquid or from cleaning liquid to White ink
(from the second time or later)

The switching process starts. When switching is
complete, the screen being processed on the
control panel changes to the

Ready

screen and so

on.

“Shaking and Replacing Ink Cartridges” on

page 83

Open the printer cover.

Remove the protective cover, and then press the

button.

Install the charging unit, and then press the

button.

Push it in all the way in the direction shown
below.

Close the printer cover, and then press the

button.

The ink switching process starts. Go to the next
step when

Remove Charging Unit

is displayed

on the control panel.

Open the printer cover.

SC-F2100 Series User's Guide

Maintenance

Summary of Contents for SC-F2100 SERIES
















































































































































Search results

Summary of Contents for SC-F2100 SERIES

Reviews:

Related manuals for SC-F2100 SERIES

Brands by name

Popular brands

Epson SC-F2100 SERIES, User Manual

Search results

Summary of Contents for SC-F2100 SERIES

Reviews:

Related manuals for SC-F2100 SERIES

Brands by name

Popular brands