A
Place the platen on a flat surface with the back
side facing up.
B
Peel off the pad that has been folded over the
edges.
Note:
Pads that have been stuck to the platen for a long
time may be hard to peel off. In this case, use a
commercially available spatula for peeling off
labels.
C
Turn it over and press the front of the platen.
D
Peel off the grip pad from back to front.
If any glue remains on the platen, soak a soft cloth
in a diluted neutral detergent, wring it out
thoroughly, and then wipe off the glue.
Switching from Polo to Zipper
(only when using the medium
grooved platen)
When loading media with a protruding section in the
center such as a zipper, remove the square part before
use.
For other media, install the square part.
A
Remove the platen's frame.
SC-F2100 Series User's Guide
Basic Printing
39
