Screen View
A
Message
Displays the printer's status, operation, and error
messages.
U
“What to Do When a Message Is Displayed” on
B
Offset Head Alignment Information
Displayed when Offset Head Alignment is set.
U
C
Condition of temperature around print head
Displayed when the temperature around the print
head exceeds 30˚C. If you continue to use the printer
while this is displayed, the frequency of automatic
cleanings
*
increases from that when the printer is
used below 30˚C. Reduce the room temperature or
temporarily stop printing to reduce the temperature
around the print head.
* Automatic cleaning is done by the printer automatically
after a set time period to keep the print head in good
condition.
D
Print job name
Displays the name of the current print job.
E
USB memory status
Displayed when printing from the USB memory
connected to the printer.
F
Platen size
Displays the platen size of the current print job. Icons
are displayed as shown below depending on the
platen size.
: L, M, S, and XS size platens
: Sleeve platen
: Medium grooved platen
G
Waste ink bottle status
Icons are displayed as shown below to indicate the
waste ink bottle status and approximate remaining
capacity.
Normal
Warning or Error
: Displays the remaining capacity of the
waste ink bottle. The height of the indica‐
tor changes depending on the remaining
capacity.
: The waste ink bottle is almost full. Prepare
a new waste ink bottle.
: The waste ink bottle is full. Replace the
waste ink bottle with a new one.
H
Status of the head cleaning set
The guideline for replacement of the head cleaning
set is displayed.
: As the time for replacement gets closer, the
indicator gradually decreases.
I
Ink cartridge status
Displays the ink cartridge status and the approxi‐
mate level of ink remaining. The display changes as
follows when the ink is low or an error occurs.
SC-F2100 Series User's Guide
Introduction
16
