Epson SC-B6000 User Manual Download Page 61

Page: 61 / 89

After replacing the cutter, press the

button.

The cutter will return to its original position.

Ready

is displayed in the control panel when the

process is complete.

Disposal of Used
Consumables

Dispose of used ink packs and chip units, as well as
printed paper following local laws and regulations, for
example by consigning waste to industrial waste
disposer.

Parts That Are Periodically
Replaced

The following parts require periodic replacement.

The time until the following parts need to be replaced
depends on the conditions of use.

❏

Print head

❏

Carriage encoder

❏

Ink holder

❏

Damper kit

❏

Pump cap

❏

Ink supply tank

The part life varies with operating conditions. Base the
decision to replace the print head on the quality of the
print results.

SC-B6000 Series User’s Guide

Maintenance

Summary of Contents for SC-B6000


























































































Search results

Summary of Contents for SC-B6000

Reviews:

Related manuals for SC-B6000

Brands by name

Popular brands

Epson SC-B6000, User Manual

Search results

Summary of Contents for SC-B6000

Reviews:

Related manuals for SC-B6000

Brands by name

Popular brands