Press the
d
/
u
buttons to cycle through the
characters for the selected character type.
Once the character you want is displayed, press
the
r
button to confirm.
The cursor will then move on to the next input
area. Repeat this process until you are finished.
If you make a mistake, press the
l
button to
delete the previous character.
C
Once you are finished entering the name, press
the
Z
button.
D
Press the
y
button to return to the paper settings
menu.
Printable area
This section describes the printable areas for the printer.
If the margin set in an application is larger than the
following setting values, sections beyond the specified
margins are not printed. For example, if 15 mm is
selected for the left and right margins in the printer
menus and the document fills the page, the 15 mm at the
left and right sides of the page will not be printed.
The gray area in the illustration below shows the
printable area.
The arrow in the illustration indicates the direction of
the ejected paper.
Margins for roll paper depend on the option selected for
Roll Paper Margin
in the menus, as shown in the table
below.
Roll Paper Margin
Settings
U
indicates factory default settings.
Roll Paper Margin
Parameter
Margin Values
Normal
A
,
C
= 15 mm
*1
*2
B
,
D
= 3 mm
Top15mm/Bottom15mm
A
,
C
= 15 mm
B
,
D
= 3 mm
Top45mm/Bottom15mm
A
= 45 mm
C
= 15 mm
B
,
D
= 3 mm
SC-B6000 Series User’s Guide
Basic Operations
37
