Epson RS-353, Service Manual

Page: 78 / 130

3.3 Disassembling and Assembling the Remote Control
Unit
The complete remote control unit is handled as a service part; its components are not
designated as service parts.
Consequently, the remote control unit needs to be
disassembled only when its track ball or switches are to be cleaned.
Figure 38
Figure 39
Screw
Figure 40
1. Remove the battery cover from the rear panel of the remote control unit and remove
two battery cells.
2. Remove one screw behind the battery holder.
3. While pushing up the rear cover, push the four hooks of the battery block inward to
unlock the cover.
4. Distort the rear cover right and left to unlock the six hooks before removing the cover.
5. Remove four board fixing screws to detach the board.
3-28