Epson RS-353, Service Manual

Page: 101 / 130

0.
Type 0 “PAUSE KEY message apper on the monitor screen after the completion of
this menu. When you execute this menu program issue the command to the LCP in
order to change the operating mode from normal to adjustment mode.
Preceding to the adjustment
menu should be executed.
1. Flicker adjustment
(1) Type at the keyboard.
(2) Make sure that the following screen is projected on the LCP projection
screen (on
the pattern section displayed on top portion of the screen, dark patterns
appear on the left side and brighter patterns on the right side).
k e r a d j u s t m e n t * *
C 0
L 0 R D
C h a n g e d a t a u s i n g
L e f t A r r o w K e y : d o w n R i g h t A r r o w K e y : u p
S e l e c t E n t e r K e y : s e t
Figure 5-I 9
Arrow key generate the plus or minus value by one
for previous setting value.
(3) Use the right and left arrow (cursor control) keys to obtain the display state in which
the flickers are minimum.

As you
press the left arrow (cursor control) key, an adjustment value from to
appears at the lower left corner of the monitor screen.
(4) Press the return key and make sure that 16-greenscale patterns appear on the
projection screen.
(5) In the same way as in step find the display state in which the flickers are
minimum.
(6) Press the return key and make sure that patterns appear on the,
projection screen.
(7) In the same way as in step find the display state in which the flickers are
minimum.
5-13