Epson RS-353, Service Manual

Page: 105 / 130

5. Data transfer
This menu option programs the settings into the flash ROM in the LCP. The set values
will not be saved in the LCP unless this menu is executed.
Be sure to run this menu
option after making any adjustment using the image adjustment program.
(1) Type 5, “Data transfer,” at the keyboard.
(2) Make sure that the top line of following messages appear on the monitor screen.
C re a t Ne w
HEX fi le? [Y/N ] Y
File name:004
File
Data Transfer
<Flash ROM download program>
P a r i t y : N o n e
Stop
Dat a L engt h:8
D o w n l o a d
A r e a : G A M M A
GAMMA
Are you sure? [y/n] Y
Flash download was successfull.
Figure 5-23
(3) Type at the keyboard if all settings are OK. The image adjustment program
starts programming the set values into the flash ROM in the LCP.
Type
to reexecute adjustments to brings about the main menu.
5-17