Epson RS-353, Service Manual

Page: 55 / 130

3.2.2
Removing the Upper Case Unit And Handle
Prerequisite conditions: None.
Handle
Figure
4
Screw
Figure 5
1. Pull up the handle. Insert the spring hook either one hole in the handle holder cover
and, while pressing the spring hook toward the hole on the opposite side, pull it up to
remove the handle. Make the center portion of the handle holder cover rise, forming
an arch.
2. Remove the two screws located beneath the handle holder cover.
Screw: (mounting =
3. Remove four case unit fixing screws on both sides.
Screw: (mounting torque: =
Caution:
The handle holder cover has claws on both ends. They may be damaged if you insert
the spring into a hook’s hole and simply pulling it up.
(Continued on the next page)
3-5