Epson RC620 CU Manual Download Page 223

Page: 223 / 226

Maintenance 7. Recovering the HDD

RC620 Rev.8

207

(20) It starts the recovery.

(21) When the recovery is complete, the [Completing the Restore Wizard] page appears.

Click the <Finish> button.

(22) The main menu of the Recovery Disk appears and reject the Recovery Disk and click

the <Reboot> button to reboot the RC620 controller.

(23) Press the <Delete> key and show the BIOS setup menu.

(24) Select “Advanced BIOS Features” and press the <Enter>.

The [Advanced BIOS Features] window appears.

(25) Change the setting of “First Boot Device” to the original you recorded in the step (5).

(26) Press the <ESC> key and return to the BIOS setup menu.

(27) Select “Save & Exit Setup” and press the <Enter> key.

(28) The [Save to CMOS and Exit (Y/N)?] dialog appears. Press the <Y> key.

(29) Windows starts up.

7.2.3 Restoring EPSON RC+ data

(1) Exit EPSON RC+ if it is running.

(2) Copy and overwrite the files backed up in “Backing up EPSON RC+ data” to HDD.

Summary of Contents for RC620 CU


































































































































































































































Search results

Summary of Contents for RC620 CU

Reviews:

Brands by name

Popular brands

Epson RC620 CU, Manual

Search results

Summary of Contents for RC620 CU

Reviews:

Brands by name

Popular brands