Epson RC620 CU Manual Download Page 120

Page: 120 / 226

Setup & Operation 14. Option : Teach Pendant TP1

104

RC620 Rev.8

14.3.6 Jog Distance

This section indicates settings in the [Jog Distance] screen.

Press the <F5> key in the [Jog & Teach] screen. The following screen appears.

When a value has been changed, press the <Enter> key to apply the value, and be sure to
press the <OK> key to save the settings.

Changing Jog Distance

Set the jog distance.

- The current jog mode and jog distance are displayed.

You can change these settings by pressing the <Jog Mode> or <Jog Dist> key.

- When the <F5-8> key lights up its LED, the toggles of <Jog Mode> and <Jog Dist>

keys are the opposite direction.

(1)

Press the

<↑> <↓> keys and move the cursor to change an item.

(2)

Change the Jog Distance.

(3)

Press the <Enter> key.

(4)

Press the <OK> key to save the settings.

Default

Press the <F1> key to return jog distance data to their defaults.



NOTE

Summary of Contents for RC620 CU


































































































































































































































Search results

Summary of Contents for RC620 CU

Reviews:

Brands by name

Popular brands

Epson RC620 CU, Manual

Search results

Summary of Contents for RC620 CU

Reviews:

Brands by name

Popular brands