❏
Triggering of a notification such as completion of
a lap or target distance in Training mode
(Notifications)
Options
: ON, OFF
When a specified time has passed, the light
automatically turns off. The backlight remains on until
the end of measuring when
Workout
is selected for
All Time
.
Note
❏
Using the device with the backlight constantly on
reduces the continuous GPS tracking time by
approximately two hours.
❏
The backlight turns off momentarily while the
device vibrates as lap or other notification. The
backlight turns back on after the device stops
vibrating.
AUTO SLEEP
When you leave the device for a while, this function
automatically puts the device into sleep status.
Options
: ON, OFF
System
Language
Set the display language.
Options
: English,
Clock Set
UPDATE TIME
This setting is used to configure the current time.
Options
: Set by GPS, Manual
❏
Set by GPS
:
The time is set in accordance with GPS
positioning. This process will take a few minutes.
GPS signals cannot be received while indoors.
Make sure the screen is facing up and you are
outside with no obstructions overhead
. If the
device fails to complete GPS positioning after two
minutes elapses, we recommend that you select
Cancel, move to a different location, and try
again.
❏
Manual
:
Configure the time manually on the device
directly.
Options
: Year, Month, Date, Hour and Minutes
Time Format
Set the format for the display time.
Options
: 12 Hour, 24 Hour
Display Seconds
This setting is used to enable and disable the display of
seconds.
Options
: ON, OFF
Auto Search
When this setting is enabled, the device will
periodically perform GPS positioning whenever a
measurement is in progress to reduce the initial GPS
signal acquisition time before starting your next
measurement.
Options
: ON, OFF
RESET
Initializing the device resets all settings to their
defaults (Profile/Settings), resets the stride sensor, and
deletes all measurement and activity data (History).
Options
: Yes, No
U
“Initializing the device” on page 88
VER.INFO
Displays the firmware version information.
Turn Off
This is used to turn off the device. To turn the device
on again, press and hold the
START/STOP
for 2
seconds.
J-347/367, U-350 User Manual
Changing Device Settings
77
