Epson ProSense J-347 User Manual Download Page 87

Page: 87 / 96

Performing system resets

Perform a system reset if operation becomes unstable.

Press the UP, ENTER, and DOWN buttons simultaneously.

The screen is reset and the device restarts.

Note

Measurement data is not recorded if a system reset is performed while measuring.

The following shows the differences between a system reset and initializing.

: Data and settings are retained.

-: Data and settings are not retained. (Settings must be reconfigured.)

Data/Settings

System reset

Initialize

Workout settings

Recall

Screen settings

System

Profile

Today's Activity Data

Target number of steps configured for

Activity

User stride data

Pairing

Time information

J-347/367, U-350 User Manual

Regular Maintenance

Summary of Contents for ProSense J-347
































































































Search results

Summary of Contents for ProSense J-347

Reviews:

Related manuals for ProSense J-347

Brands by name

Popular brands

Epson ProSense J-347, User Manual

Search results

Summary of Contents for ProSense J-347

Reviews:

Related manuals for ProSense J-347

Brands by name

Popular brands