PriorityFax 2000 Manual
For the horizontal installation, attach the output tray to the output
tray base using the rear slots. For the vertical installation, attach
the tray to the base using the front holes. See the illustration below.
To attach the output tray in a horizontal position, insert the pegs
on both sides of the output tray into the rear slots on the output
tray base. Then push the output tray as far back as it will go.
To attach the tray in a vertical position, insert the pegs on the
output tray into the front holes on the output tray base. Then allow
the tray to hang over the edge of the fax machine operating surface
to catch your incoming or copied documents.
1-8
