Setting Up the Priority Fax
Reloading Paper
The LCD lets you know when to replace the paper roll. When
approximately 4 inches (10 cm) of paper is left, the ADD PAPER
message appears on the LCD. When you see this message, remove
the old roll and follow the instructions above to insert the new roll.
Running a Copy
Test
Insert Document
A quick test of your PriorityFax is the convenience copy function.
You can copy any document
that
is no more
than
8.5 inches wide.
Just follow the instructions below.
Note
The fax machine cannot read anything at
the
very edge of
a document. Make sure to leave a margin of at least 0.15
inches (3.8mm) on the top, bottom, and sides of any
document you copy or send.
Use copies duplicated by this machine as temporary copies only. If
it is necessary to store a copy for a long time, use a copy machine
to reproduce
the
original document.
Turn the document face
down
with the top of the document toward
the feeder. Insert the document into
the
feeder as shown in the
illustration below. If the document is less
than 8.5
inches wide,
adjust
the
document guide on the
right
to match the width of the
paper. The paper is drawn slightly into the fax machine.
1-13
