Using the PriorityFax
The ready display appears.
Press
SPKR
or lift the handset. You hear the dial tone.
Dial the number of the receiving fax machine. (Include the area
code if the receiving fax machine is outside of your dialing area.)
When you hear the fax tone, press
START
promptly. Then hang
up if you are using the handset. Unless you press
START
immediately, the line is disconnected and you hear the busy
tone.
Note
If
the
receiving fax machine is not using Auto Answer, a
voice may answer. If this happens, ask
the
other party to
start fax reception by pressing
START
and hanging up.
(Since PriorityFax is not a speaker phone, you must use
the handset to talk to the other party.) Press
START
and
then hang up when you hear the fax
tone.
The fax machine pulls the document through the slot as it sends it;
then it beeps
once when
transmission is complete. (If
the
Transmission Verification feature is turned on, the fax machine
prints a report a few moments later.)
If a fax does not successfully reach its destination, the PriorityFax
displays COMM ERROR, beeps several times, and prints a
communication error report.
2-9
