manualshive.com logo in svg

Epson Priority Fax 2000, Owner'S Manual, Page: 76 / 112

Share
Download
Epson Priority Fax 2000 Owner'S Manual Download Page 76

Using the PriorityFax Advanced Features

Press 

FUNCTION. 

You see the function display.

Press 3 for Delayed Send.

Use the # cursor key to turn the function on. The following display

appears:

Press 

SET. 

You see the following display.

Use the keypad to select the day and time to send. For the first 0

(day), enter a number from 0 to 7, where 0 is today, 1 is tomorrow,
4 is four days from now, etc. For 00:00, enter the hour and minutes

using a 24hour clock; for example, 01:20 is 1:20 a.m. and 14:03 is
2:03 p.m. If you enter 0 for today, be sure that you enter a time
later than the current time. If you enter the current time or an

earlier time, the PriorityFax sends your document immediately.

The document to be sent remains physically in 

the 

feeder of your

machine until the delay time is reached. You can receive
documents, but you cannot send them until the delay time has
been reached and the document in the feeder 

has 

been sent.

Press 

SET 

twice.

4-15

Summary of Contents for Priority Fax 2000

















































































































Reviews:

No comments