Getting Started 14
Charging the Battery
After installing the battery, you need to charge it using the
AC adapter. It takes about 3.5 hours to fully charge the
battery. The battery status is displayed in the top right
corner of the LCD screen when the P-1000 is on.
Note:
Although the full battery icon may appear before 3.5 hours,
leave the AC adapter connected for the entire 3.5 hours to
ensure the battery is fully charged.
Follow these steps to charge the battery:
1
Remove the connector cover.
2
Connect the AC adapter as shown below. Connect the
other end to an electrical outlet.
Caution:
Do not connect the AC adapter when the battery is not
installed; this can damage the P-1000.
:
Battery is fully charged.
:
Battery power is about half full.
:
Battery power is low.
:
Battery power is running out. The P-1000 is shut
down automatically. Charge the battery using the AC
adapter.
:
Battery is charging.
Connector cover
Summary of Contents for P-1000 - Photo Viewer - Digital AV Player
Page 1: ... 8VHU V XLGH ...