Epson MTX 1345, Operator'S Manual

Page: 45 / 137

Maintenance Maintenance
4-3 4-4
PRINT TEST3 4.2 Cleaning Procedure
CONFIGURATION
PM1 20808xxx PM2 00000000 PM3 20807483 PBC 20807xxx
SPC 20807402 MC 00000000 CUR 4 PMR 0
MCR 0
NFQ 1800 DSF 100 GSF 70 NTF 240
TNA1 230 TNA2 260 TNA3 260 CAC 3.10
PTC1 2.75 PTC2 2.85 PTDT 5 PHCS1 2.20
PHCS2 1.00 PGC 30 PGCNT 3333 SBP 25
C011 NV-1.0 C012 NV-2.3 C013 NV-2.5
C014 NV-2.6 C015 NV-2.8 C031 ISO 8859/1
C061 IBM SET 1 C062 IBM SET 2 C063 IBM CODE PAGE
C071 EPSON EXT. GCT C091 BARCODE
DATA L.GOTHIC NLQ L.GOTHIC LQ
L.GOTHIC-I NLQ L.GOTHIC-I LQ COURIER NLQ
COURIER LQ MICRO NLQ MICRO LQ
ORATOR NLQ ORATOR LQ ORATOR-C NLQ
ORATOR-C LQ ROMAN NLQ ROMAN LQ
PRESTIGE NLQ PRESTIGE LQ SCRIPT NLQ
SCRIPT NQ OCR A LQ OCR B LQ
DATA BLOCK DATA LARGE
CHARACTER SET : EPSON EXT. GCT 1: U.S.A.
AGC TEST AGC TEST AGC TEST AGC TEST AGC TEST
PRINTHEAD NEEDLE
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
DATA
!"#$%&'()*+,-./01234567890:;<=>?.......
.
.
Note:
The number following PM1 identifies the micro program and the number
following PM3 identifies the character set.
1. Power the printer ON and remove the top cover.
2. Remove the ribbon cassette.
3. Thoroughly brush and vacuum all accessible areas to remove any paper flock
and dust.
4. Clean the platen's surface, the paper pressure rollers and the transport rollers
using the platen cleaner. In order to access the transport rollers loosen the
green screws and remove the metal bar with the metal rollers.
5. Clean the covers and the operator panel with a damp, lint-free cloth. Do not
use cleaning solvents or excessive amounts of water.
6. Insert the ribbon cassette (see Chapter 1.5 Installing the Ribbon Cassette ).
7. Remount the top cover.