Important Safety Instructions
Important Safety Instructions
V
VI
For Your Safety
Operating Environment
To ensure safe operation the three-pin plug supplied must be inserted only into
sun light).
a standard three-pin power point which is effectively grounded through the
normal household wiring.
S
Temperature:
+ 10
E
C to + 35
E
C (+50
E
F to +95
E
F)
Extension cords used with the equipment must be three-conductor and be
S
Humidity with Automatic
correctly wired to provide connection to ground. Incorrectly wired extension
Sheet Feeder (ASF):
30% to 70%
cords are a major cause of fatalities.
The fact that the equipment operates satisfactorily does not imply that the
ensure that these openings are not obstructed.
power is grounded and that the installation is completely safe. For your safety,
if in any doubt about the effective grounding of the power, consult a qualified
Also ensure that the cables at the rear of the printer do not interfere with the
electrician.
output paper path.
This
MTX 1345
printer fulfills the safety regulations according to UL 1950 and
When processing fanfold paper always place the printer with its front edge
VDE (IEC 950) and CSA 22.2/No. 950 for computer systems.
slightly off the edge of the table.
The main power cable must be connected to a ground protected wall-socket.
The selected voltage of the printer must be in accordance with the local
voltage.
The power plug must be easily accessible at any time so that it can be
disconnected immediately in case of danger or for maintenance purposes..
Comme le câble de secteur sert de dipositif d'arrêt-urgence, sa connexion à
l'imprimante doit être tout le temps accessible.
Before installing the printer, check the surrounding conditions in which the
printer will be placed (see next page, Operating Environment and chapter 1).
During a thunderstorm you should never attempt to connect or disconnect any
interface cables.
The power supply should only be opened and checked by authorized personnel.
Repairs and maintenance beyond the descriptions of chapter 5 should only be
attempted by authorized personnel as well. Repairs done inappropriately may
cause damage to the device and severe danger for the user.
Avoid installing the printer where it is exposed to moisture or heat (eg. direct
S
Humidity:
20% to 80%
Slots and openings in the printer's housing are provided for ventilation. Always
