Appendix E IBM ProPrinter 4207, 4208 XL 24 Quick Refernce
Appendix E IBM ProPrinter 4207, 4208 XL 24 Quick Refernce
**)
only
PRINTER TYPE 1
and
PRINTER TYPE 2
***)
only
PRINTER TYPE 1
and
PRINTER TYPE 3
*)
only
PRINTER TYPE 1
*)
only
PRINTER TYPE 1
***)
only
PRINTER TYPE 2
and
PRINTER TYPE 3
****)
only
PRINTER TYPE 3
E-5
E-6
Table 3 (Cont.): Vertical Form Handling
Table 3 (Cont.): Vertical Form Handling
Escape Sequence
Mnemonic Function
Escape Sequence
Mnemonic Function
ESC ]
Reverse Line Feed
ESC [ ; ; P3 s
Paper Exit:
ESC ] > s
IF
Insert Form
P3 = 1 :
Paper Exit Front Side
*)
Native Command
(confirmed by Start/Stop key)
ESC [ > P1 ; P2 ; P3 ; P4 s
SPSIF
Select Paper Source and Insert
(not confirmed by Start/Stop
Native Command
Form, Print Gap, Paper Exit, Cut-Mode
key, controlled by application)
(any parameter > or P may be skipped, see
P3 = 3 :
Batch output; rear side
following alternative command sequences);
> = Insert Form
ESC [ ; ; ; P4 s
Cut Mode On/Off:
****)
ESC [ P1 s
SPS
Paper Source:
P4 = 1 :
Cut Mode On
Native Command
P1 = 0
: Manual Feed
**)
P4 = 2 :
Cut on actual position
P1 = 1
: ASF, Bin 1
*)
(cutting edge is approximate 4 mm above the base of the actual line)
P1 = 2
: ASF, Bin 2
*)
P1 = 3
: ASF, Bin 3
*)
P1 = 6
: upper Tractor
***)
P1 = 7
: Tractor Feed (lower Tractor)
P1 = 8
: ASF, Bins 1 or 2
*)
P1 = 9
: ASF, Bins 2 or 3
*)
P1 = 1 0
: ASF, Bins 1 or 2 or 3
*)
P1 = 1 5
: upper and lower tractor
***)
ESC [ ; P2 s
AGC/PCC Procedure:
Native Command
P2 = 0 : Automatic Gap Control
P2 = 1 : Print Gap for 1-ply copy
P2 = 2 : Print Gap for 2-ply copies
P2 = 3 : Print Gap for 3-ply copies
P2 = 4 : Print Gap for 4-ply copies
P2 = 5 : Print Gap for 5-ply copies
P2 = 6 : Print Gap for 6-ply copies
Native Command
P3 = 0 :
Paper Exit Stacker
***)
P3 = 2 :
Paper Exit Front Side
*)
Native Command
P4 = 0 :
Cut Mode Off
