MENU
a a
a a
abc
92
93
96
97
91
90
95
94
4 ELQ
abc
a b c
MENU
Y
Exit
Y
Exit
Y
Exit
Y
Exit
*
TRACT. L. V 0
FANFOLD DIS. 0
[
Y
READY
MACRO 1
MACRO 2
MACRO 3
MACRO 4
Select
Select
Select
Select
Select
Exit
*
a a
a a
Up
Down
Offset
Offset
L or U: depending on the selected paper source
MENU
a a
a a
abc
a b c
MENU
a a
a a
abc
a b c
Printer Operation
Printer Operation
2-3
2-4
Note:
After pressing one of the keys
the menu mode is
- Top Row Keys
activated. Now the keys of the top row can only be used as cursor
The
Quick Macro Selection
mode is entered when one of the top row keys
keys to move within the menu tree (right [
Y
], left [
Z
], up [
[
] and
,
,
or
is pressed. From the left to the right macro 1 to macro
down [
\
]).
4 will be selected. Pressing of key
causes the printer to change in the
2.2.2
Detail Description of Keys
- in the printer operation state
READY
or
BUSY
-
Quick Settings
(only active if not locked in the menu function
MENU ACCESS
with
QUICK SET OFF
(see
Chapter 3
)).
STOP
-mode and in the display appears the message
MACRO 2
. Pressing
key [
Y
] confirms the macro selection and changes the printer into the
READY
or
BUSY
mode. After this sample the printer the message on the display is
READY 2 IPP
. That means macro 2 with IBM ProPrinter emulation is
selected.
If you press one of the above described key erroneously, press
for
correction.
Note:
Macro selection means a change of all configuration parameters of the
macro concerned.
- Lower Row Keys
In case a certain application requires a specific vertical positioning of the
printout on a continuous form, two possibilities are provided for the
READY
or
BUSY
mode:
-
vertical position adjustment
VERT.POS.ADJ.
with key
(90)
-
fanfold displacement
FANFOLD DIS
with key
(91).
-
Vertical Position Adjustment (VERT.POS.ADJ.)
(90)
This can be set differently for each macro to exactly position the printout in
relation to the top edge of the form in use. Using this function, the TOP
MARGIN and BOTTOM MARGIN settings are taken into account as well.
The parameter is part of the printer´s configuration set up memory and can
be stored with the
SAVE
function.
The
VERT. POS.ADJ.
mode can directly be called up in the status
READY
or
BUSY
by pressing key
. In this case a set up is possible for the
actually paper source of the selected macro. With
TRACTOR V
,
MANUAL V
or
BIN x V
(x = 1-3) the printer asks for the value of the
actually paper source.
