Service Manual
Adjustments
8.
9.
Type 1 to select
Adjustment then press Enter. After 10 line feeds, the printer prints 5 rows
of H characters in both draft and LQ modes. When the printer begins bidirectional printin&
the message
TEST PRINTING” appears on the display.
After printing is complete, the following message appears on the display:
INPUT
Draft: -
10.
From the 5 rows of draft patterns, find the row in which the vertical lines
in the
H are best
aligned, then enter the value assigned to that row. The following figure is an example of the
printout.
After you enter the value for draft, the following message appears on the display:
LQ : -
11.
12.
From the 5 rows of LQ patterns, find the row in which the vertical lines in the
H are best
aligned, then enter the value assigned to that row.
The printer lets you check your print pattern selection for confirmation following steps 9 and
10 by printing one row of the pattern you selected.
After the printer prints check patterns for confirmation, the
g message appears on the
display:
If
is correct, press “Y’ and the Enter key, and
if
is incorrect, press “N” and Enter. –
If your printed pattern is aligned vertically, press Y and Enter to complete the
adjustment. Otherwise, press N to return to step 9 to specify another adjustment value.
4-5
Summary of Contents for LX-300
Page 1: ... EPSON TERM NAL PR NTER LX 300 SERVICE MANUAL EPSON ...
Page 4: ...REVISION SHEET Revision Issue Date Revision Page Rev A April 6 1994 1st issue 4 j v ...
Page 95: ...Maintenance LX 300 Service Manual k w n M IL f Figure 6 1 LX 300 Lubrication Points 6 2 Rev A ...
