manualshive.com logo in svg

Epson LQ-570e, User Manual

The Epson LQ-570e is a reliable dot matrix printer designed for high-speed printing. It guarantees crisp, clear text documents and graphics. Enhance your printing experience by downloading the user manual from manualshive.com for free. This comprehensive manual provides step-by-step instructions to optimize your printer's performance and functionality.

Share
Download
background image

1-16      

Setting Up the Printer

Installing the Printer Software

After you connect the printer to your computer, you need to 
install the software included on the EPSON printer software CD-
ROM shipped with your printer.

Your printer software includes:

❏

Printer driver
The printer driver is the software that runs, or “drives,” your 
printer. With it, you can make printer settings such as print 
quality, resolution, and paper size.

❏

EPSON Status Monitor 3 (Windows 95, 98, or NT 4.0 only)
The EPSON Status Monitor 3 notifies you of printer errors and 
displays printer status information.

❏

EPSON Remote! (a DOS-based printer setup utility)
The EPSON Remote! utility allows you to easily change the 
printer’s default settings from the computer screen. See 
“Using the EPSON Remote! Utility” on page 4-30.

To install the printer software, see “Installing the printer software 
in Windows 95, 98, or NT 4.0” or “Installing the printer software 
in Windows 3.1 or NT 3.5x” in this section. If you are using DOS, 
see “For DOS programs” on page 1-19.

Installing the printer software in Windows 95, 98, or NT 4.0

Follow the steps below to install the printer software in Windows 
95, 98, or NT 4.0:

Note:

❏

Installing the printer software for Windows NT 4.0 may require 
network administration privileges. Ask your administrator for more 
information.

Summary of Contents for LQ-570e

























































































































































































































































Reviews:

No comments

Related manuals for LQ-570e

Canon PIXMA MX882 Series Network Setup Manual preview
PIXMA MX882 Series
Brand: Canon Pages: 34
Canon MX470 Getting Started preview
MX470
Brand: Canon Pages: 4
Canon MX470 User Manual preview
MX470
Brand: Canon Pages: 913
Canon Laser Class 700 Series Setup Manual preview
Laser Class 700 Series
Brand: Canon Pages: 30
Canon Laser Class 700 Series Datasheet preview
Laser Class 700 Series
Brand: Canon Pages: 6
Canon Laser Class 700 Series Specification preview
Laser Class 700 Series
Brand: Canon Pages: 6
Canon Laser Class 700 Series Network Manual preview
Laser Class 700 Series
Brand: Canon Pages: 108
Canon PIXMA MX860 series Network Manual preview
PIXMA MX860 series
Brand: Canon Pages: 9
Canon imagePROGRAF iPF9400 Brochure & Specs preview
imagePROGRAF iPF9400
Brand: Canon Pages: 8
Canon PIXMA MX860 series Getting Started Manual preview
PIXMA MX860 series
Brand: Canon Pages: 93
Canon MP980 series Manual preview
MP980 series
Brand: Canon Pages: 20
Canon PIXMA MX922 Setup Manual preview
PIXMA MX922
Brand: Canon Pages: 30
Canon PIXMA MX922 Easy Setup preview
PIXMA MX922
Brand: Canon Pages: 2
Panasonic Workio DP-C262 Scanner Manual preview
Workio DP-C262
Brand: Panasonic Pages: 54
Panasonic KXMB2000E Important Information Manual preview
KXMB2000E
Brand: Panasonic Pages: 12
Panasonic KX-MB2000 Important Information Manual preview
KX-MB2000
Brand: Panasonic Pages: 12
Panasonic KX-MB1500E Important Information Manual preview
KX-MB1500E
Brand: Panasonic Pages: 8
Panasonic KX-FLB851 - All-in-One Flatbed Laser Fax Guía De Referencia Rápida preview
KX-FLB851 - All-in-One Flatbed Laser Fax
Brand: Panasonic Pages: 28

Brands by name

Popular brands

Load more brands