manualshive.com logo in svg

Epson LQ-570e, User Manual

The Epson LQ-570e is a reliable dot matrix printer designed for high-speed printing. It guarantees crisp, clear text documents and graphics. Enhance your printing experience by downloading the user manual from manualshive.com for free. This comprehensive manual provides step-by-step instructions to optimize your printer's performance and functionality.

Share
Download
background image

B-2      

Cleaning and Transporting the Printer

Cleaning the Printer 

To keep your printer operating at its best, you should clean it 
thoroughly several times a year. To clean your printer, follow 
these steps:

1. Remove any paper loaded in the printer. Make sure the 

printer is turned off. 

2. Remove the paper guide. If a pull tractor or an optional cut-

sheet feeder is installed, remove it.

3. Use a soft brush to carefully brush away all dust and dirt from 

the outer case and paper guide.

4. If the outer case or paper guide is still dirty or dusty, clean 

them with a soft, clean cloth dampened with mild detergent 
dissolved in water. Keep the printer cover in place and lower 
it until it lies flat on the top of the printer to prevent water 
from getting inside the printer.

 

c

Caution:

❏

Never use alcohols or thinners to clean the printer; these 
chemicals can damage the printer components as well as the 
case.

❏

Be careful not to get water on the printer mechanism or 
electronic components.

❏

Do not use a hard or abrasive brush.

❏

Do not spray the inside of the printer with lubricants; 
unsuitable lubricants can damage the printer mechanism. 
Contact an EPSON dealer if you think lubrication is needed.

Summary of Contents for LQ-570e

























































































































































































































































Reviews:

No comments

Related manuals for LQ-570e

IBM 3160 Introduction And Planning Manual preview
3160
Brand: IBM Pages: 102
NCR 7150 Quick Start Manual preview
7150
Brand: NCR Pages: 2
Xerox WorkCentre 7525 User Manual preview
WorkCentre 7525
Brand: Xerox Pages: 70
Xerox WorkCentre 7525 Quick Manual preview
WorkCentre 7525
Brand: Xerox Pages: 8
Xerox WorkCentre 7328 Quick Network Setup Manual preview
WorkCentre 7328
Brand: Xerox Pages: 24
Xerox WorkCentre 7232 Copying Manual preview
WorkCentre 7232
Brand: Xerox Pages: 4
Xerox WorkCentre 7232 Evaluator Manual preview
WorkCentre 7232
Brand: Xerox Pages: 24
Xerox WorkCentre 7232 System Administrator Manual preview
WorkCentre 7232
Brand: Xerox Pages: 236
Xerox WorkCentre 7232 Quick Use Manual preview
WorkCentre 7232
Brand: Xerox Pages: 128
Xerox WorkCentre 7232 Quick Network Setup Manual preview
WorkCentre 7232
Brand: Xerox Pages: 25
Xerox WorkCentre 7232 Voluntary Product Accessibility Template preview
WorkCentre 7232
Brand: Xerox Pages: 8
Xerox WorkCentre 7228 Quick Manual preview
WorkCentre 7228
Brand: Xerox Pages: 22
Xerox WorkCentre 7228 System Administrator Manual preview
WorkCentre 7228
Brand: Xerox Pages: 300
Xerox WorkCentre 7300 Series Quick Use Manual preview
WorkCentre 7300 Series
Brand: Xerox Pages: 128
Xerox WorkCentre 7132 Service Manual preview
WorkCentre 7132
Brand: Xerox Pages: 27
Xerox WorkCentre 7300 Series Troubleshooting Manual preview
WorkCentre 7300 Series
Brand: Xerox Pages: 40
Xerox 6200DX - Phaser Color Laser Printer Troubleshooting Manual preview
6200DX - Phaser Color Laser Printer
Brand: Xerox Pages: 42
Xerox WORKCENTRE 7425 Ghid De Utilizare preview
WORKCENTRE 7425
Brand: Xerox Pages: 280

Brands by name

Popular brands

Load more brands