Epson EB-G6870, User Manual

Page: 77 / 196

Frame Interpolation (EB-G6970WU only)
The current and previous frames are used to create intermediate frames,
interpolating to produce smooth-moving images. You can resolve clumsy-
moving images, such as frame skipping when projecting a fast moving
image.
Make settings from the configuration menu.
s
Signal - Frame Interpolation p.109
You can select the level of interpolation: Low , Normal or High . Set to Off
if noise occurs after setting them.
Projecting 3D images
By using two projectors, you can project passive 3D images. You need the
following optional items to project and view 3D images. Make sure you
read the notes in the user's guides supplied with the optional items.
•
Polarizer (ELPPL01)
•
Passive 3D Glasses (ELPGS02A/ELPGS02B)
s
"Optional Accessories" p.171
When projecting 3D images, set 3D Images to On from the Configuration
menu.
s
Signal - 3D Setup - 3D Images p.109
The following color modes are available when projecting 3D images. When
projecting using the optional polarizers (ELPPL01), you can view images at
their optimal color tint.
•
3D Dynamic
•
3D Presentation
•
3D Theatre
•
3D Multi-Projection
a
This projector arranges the direction of polarizing projection for R
(red), G (green), and B (blue). It is not necessary to inverse left and
right eye G (green) image signals.
Adjusting Projected Images
77