Quick Corner
This allows you to manually correct each of the four corners of the
projected image separately.
a
Press the [Menu] button while projecting.
b
Select
Geometric Correction
from
Settings
.
c
Select
Quick Corner
, and then press the [
] button.
If the message "If this setting is changed, the image may be
distorted." is displayed, press the [
] button.
d
Use the [
], [
], [
], and [
] buttons to select the corner you
want to adjust, and then press the [
] button.
a
If the [Esc] button is pressed for approximately two seconds,
the confirm default reset screen is displayed.
Select
Yes
to reset the result of Quick Corner corrections.
e
Use the [
], [
], [
], and [
] buttons to correct the position of
the corner.
When you press the [
] button, the screen shown in step 4 that
allows you to select the area to be corrected is displayed.
If the message "Cannot adjust any further." is displayed while
adjusting, you cannot adjust the shape any further in the direction
indicated by the gray triangle.
f
Repeat procedures 4 and 5 as needed to adjust any remaining
corners.
g
To complete the corrections, press the [Menu] button.
Adjusting Projected Images
53
Summary of Contents for EB-G6870
