Other Settings
Setting basic operations
You can make settings for basic operations such as turning the projector on or off in
Operation
from the Configuration menu.
Press [Menu] button >
Extended
>
Operation
You can make the following settings in
Operation
.
Operation
Settings
Turn the projector on or off by turning the main power
supply on or off or by plugging in or unplugging the
power cable.
Set
Direct Power On
to
On
. (Default:
Off
)
Stop projection automatically when no image signal is
being input and no operations are carried out.
Set
Sleep Mode
to
On
. (Default:
On
) Set the time until the projector enters sleep mode in
Sleep Mode Timer
.
You can set within a range of 1 to 30 minutes. (Default:
30min.
)
Use the projector above an altitude of 1500 m.
Set
High Altitude Mode
to
On
. (Default:
Off
)
Start projecting images from the same source as last time
when the projector is turned on.
Set
Startup Source Search
to
Off
. (Default:
On
)
*
1
Control the projector from a computer using
communication commands without releasing A/V mute.
Set
A/V Mute Release
to
A/V Mute
. (Default:
Any Button
)
*
2
Turn off the confirmation buzzer that beeps when the
power turns on or off.
Set
Beep
to
Off
. (Default:
On
)
*
1 Because the default is
On
, the projector automatically detects image signals being input when it is turned on.
*
2 The default value is
Any Button
. A/V mute is released when any operation is performed on the projector.
Setting Up
31
Summary of Contents for EB-G6800
Page 1: ...Installation Guide ...
Page 5: ...Main Guide ...
