Epson EB-4550, Installation Manual

Page: 15 / 91

Turning On
a
Connect the power cable.
Connect the power cable supplied.
b
Turning on the projector.
Using the remote control Using the control panel
Warning
Do not look into the lens during projection.
a
•
We recommend setting the focus, zoom, and lens shift at least
30 minutes after you start the projection, because images are
not stable right after turning on the projector.
•
When using at an altitude of 1500 m or more, make sure you
set
High Altitude Mode to On .
Press [Menu] button > Extended > Operation > High
Altitude Mode
•
When you turn on the projector for the first time, the
message "Do you want to set the time?" is displayed. See the
following for more information on setting the time.
s
p.29
Turning Off
a
Turn off any connected devices.
b
Press [
t
] once on the remote control, or press [
t
] twice on the
control panel.
Using the remote control Using the control panel
× 2
c
When the projector beeps twice, disconnect the power cable.
a
To prevent accidental operations, set Standby Confirmation to On to
display a confirmation message asking if you want to turn off the
projector when the [
t
] button is pressed on the remote control.
(When Remote Control Type is set to Simple , you cannot make
Standby Confirmation settings.)
Press [Menu] button > Extended > Display > Standby Confirmation
After making the settings, a confirmation message is displayed when
you press the [
t
] button on the remote control, and the projector
turns off if you press the [
t
] button one more time.
Turning On and Off
15