Epson EB-4550, User Manual

Page: 84 / 156

Submenu Function
PJLink Password
Set a password to use when you access the projector using
compatible PJLink software.
You can enter up to 32 single-byte alphanumeric characters.
(Symbols cannot be used.)
s
"About PJLink" p.132
Web Control
Password Set a password to use Web Remote. You can enter up to 8 single-
byte alphanumeric characters. (
* cannot be used)
Web Remote is a computer function that allows you to operate
the projector by using the Web browser on a computer
connected on a network.
s
"Changing Settings Using a Web Browser (Web Control)"
p.127
Projector Key-
word When set to On , you have to enter the keyword when you try to
connect the projector to a computer via a network. As a result,
you can prevent presentations from being interrupted by
connections from other computers.
Normally this should be set to
On .
s
EasyMP Network Projection Operation Guide
Wireless LAN menu
To connect the projector to a computer using a wireless LAN, install the
Wireless LAN unit (ELPAP07).
s
"Installing the Wireless LAN Unit" p.34
Submenu Function
Wireless LAN
Power
Set this to On when connecting the projector and a computer via
a wireless LAN. If you do not want to connect via wireless LAN,
turn it
Off to prevent unauthorized access by others.
Connection
Mode
Set the connection mode to use when connecting the projector
and a computer via a wireless LAN.
If you select
Quick , a small network is created automatically by
the projector and computer. It is used with EasyMP Network
Projection. If
SSID Auto Setting is set to On , the projector
becomes an easy access point; if it is set to Off , the network is
created in Ad hoc mode
g
. If you select Advanced , the
connection is established in infrastructure mode
g
through the
access point installed.
Channel
You can select the channels used to connect in Quick mode. If
interference from other signals occurs, use a different channel.
Wireless LAN sys-
tem
Sets the wireless LAN system. Normally this should be set to
802.11b/g/n . The connection method is selected automatically
according to the access point settings.
In an area that does not support 802.11n, only
802.11b/g is
displayed.
List of Functions
84